Maintenance Guide
Keep your Stone Tec film performing at its best for years with the right care routine.
Care Topics
What you need to know
Cleaning
pH-neutral soap, microfiber mitts, and rinse thoroughly.
Waxing
Only film-safe waxes — avoid solvent-heavy products.
Chemicals
Avoid petroleum solvents, strong acids, and bug removers near edges.
Pressure Wash
Keep 12–18 inches from edges; no direct spray on seams.
Contaminants
Remove bird droppings, tree sap, and bugs promptly to prevent staining.
Polishing
Only ultra-fine finishing polishes; avoid aggressive compounds.
Inspection
Inspect edges quarterly; contact an installer if lifting appears.
Quick Reference
At-a-glance summary
Best Practices
Do's and Don'ts
Best Practices
Do
- Use pH-neutral soap and clean microfiber
- Rinse thoroughly before drying
- Remove bird droppings and sap promptly
- Keep pressure washers 12–18" from edges
- Use film-safe waxes and sealants
Avoid
Don't
- Don't use ammonia or vinegar cleaners on window film
- Don't use abrasive sponges or rough towels
- Don't use aggressive polishing compounds
- Don't direct high-pressure spray at edges
- Don't leave contaminants on the surface for extended periods
FAQ
Maintenance Questions
Touchless washes are fine after full cure (48–72 hours minimum, 3–7 days ideal). Avoid brush and soft-touch washes that can catch film edges.